C2931M (7/05)
PMCD750 DLP™ Display
Removable On-Screen Code Chart
The PMCD750 will flash a sequence of red and amber lights on the screen to indicate current status or if a fault exists. Cut out these cards for convenient
referencing of the on-screen codes.
Condition
Priority
Each block represents 0.2 seconds
R
Door open
1
2
R
R
R
R
R
R
R
R
R
Power supply fan failed
DLP fan failed
Amber
Amber
3
R
350V failed
4
R
R
R
R
R
Amber
Optical engine failed
5
Amber
R
Lamp failed
6
R
R
Lamp off (wait, auto off)2
Wait (lamp off, cooling)
Lamp off (lamp saver)3
Lamp off (ready to turn on)
Lamp striking (starting)
Lamp on, no alarms
7
Amber
Amber
Amber
8
R
R
9
Amber
Amber
Amber
Amber
Amber
Amber
R
10
11
12
Amber on continuously
R = Red
To show the code, press MONITOR button once.
1With Priority 1-6, to turn lamp on, cycle off, and then on. If Auto Codes in the Miscellaneous menu is checked, events with Priority 1-5 start the
on-screen code automatically.
2Lamp Saver turned lamp off; lamp is cooling and will turn on at end of cooling period.
3A Lamp On command from the remote or from RS-232 commands will turn lamp on.
Condition
Priority
Each block represents 0.2 seconds
R
Door open
1
2
R
R
R
R
R
R
R
R
R
Power supply fan failed
DLP fan failed
Amber
Amber
3
R
350V failed
4
R
R
R
R
R
Amber
Optical engine failed
5
Amber
R
Lamp failed
6
R
R
Lamp off (wait, auto off)2
Wait (lamp off, cooling)
Lamp off (lamp saver)3
Lamp off (ready to turn on)
Lamp striking (starting)
Lamp on, no alarms
7
Amber
Amber
Amber
8
R
R
9
Amber
Amber
Amber
Amber
Amber
Amber
R
10
11
12
Amber on continuously
R = Red
To show the code, press MONITOR button once.
1With Priority 1-6, to turn lamp on, cycle off, and then on. If Auto Codes in the Miscellaneous menu is checked, events with Priority 1-5 start the
on-screen code automatically.
2Lamp Saver turned lamp off; lamp is cooling and will turn on at end of cooling period.
3A Lamp On command from the remote or from RS-232 commands will turn lamp on.
Worldwide Headquarters • 3500 Pelco Way • Clovis, California 93612 USA • www.pelco.com
USA & Canada • Tel: 800/289-9100 • Fax: 800/289-9150
International • Tel: 1-559/292-1981 • Fax: 1-559/348-1120
Pelco and the Pelco logo are registered trademarks of Pelco.
DLP is a registered trademark of Texas Instruments, Inc.
©Copyright 2005, Pelco. All rights reserved.
|
Pelco Water Dispenser C2237M User Manual
Philips Electric Shaver QT4050 User Manual
Philips Home Theater System LX2610D User Manual
Philips Universal Remote Universal Home Theater Remote Control User Manual
Pioneer Electronic Keyboard DDJ SB User Manual
Pitco Frialator Pasta Maker RSCPE14 User Manual
Planet Technology Network Router WAP 4030A User Manual
Plustek Scanner Plustek PS506U SmartOffice Series User Manual
Polaroid Digital Camera MicroCam User Manual
PYLE Audio Headphones PHPNC45 User Manual