Installation and Assembly - Cord Management Adapter to be used with
Armor Lock Box
Model: ACC 800
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
Parts List
Before you start make sure all parts listed are included with your product.
B
D
QTY.
DESCRIPTION
PART NO.
580-1020
520-1084
600-1004
520-1187
A
B
C
D
1
1
1
1
cord management adapter
#10-32 x 3/8 socket pin screw
1.5 x 6.6” vinyl (not shown)
#10-32 x 3/16" slotted set screw
A
Some parts may appear slightly different than illustrated.
ExtensionColumn
Threadcordmanagementadapter(A)
between extension column and Armor
Lock Box. Secure the cord manage-
ment adapter (A) at top by aligning one
of the four holes in the cord manage-
ment adapter (A) with the notch in the
extension column using screw (B).
Note: Slotted set screw (D) is used to
jam against the threads of extension
column to prevent any excess move-
ment. Do not overtighten screw;
(UL Listed EXT or ADJ Series)
Sold Separately
A
B
D
overtighteningscrewwilldamage
threads making it difficult to separate
the products.
A
A
existing
set
screw
Armor Lock Box
(Sold Separately)
Secure the cord management adapter
(A) at the bottom by aligning one of the
four holes in the Armor Lock Box with
the notch in the cord management
adapter (A). Note: The screws used
for this attachment were provided
with the Armor Lock Box. Vinyl wrap
has been supplied to cover any ex-
posed threads on extension column.
existing
screw
Thread cords through top of extension column and pull cords through hole in cord management adapter (A) as
shown below. Note: Make sure cords are long enough to reach back of projector and not binding.
A
A
ISSUED: 08-21-01 SHEET #: 100-9003-5 06-29-05
1 of 1
For customer service call 1-800-729-0307 or 708-865-8870.
©2004PeerlessIndustries,Inc. Allrightsreserved.
PeerlessisaregisteredtrademarkofPeerlessIndustries,Inc.
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.
|